|
c |
|
This Sterling engine was built from a kit. I not been able to make it run.
NOT FOR SALE |
|
Sterling |
Tom Wilk’s Home Page |
|
Home of vintage & classic model airplane plans and magazine database on CD |


|
This cannon has a bore of about .20. I use a glow plug to set off a black powder charge.
NOT FOR SALE |
|
Brass Cannon |
|
Grace |
|
Grace is a double acting wobbler made from plans. The bore is .250 with a stroke of .250. Grace will run on 5 to 10 PSI.
NOT FOR SALE |
|
Dodi is a twin cylinder single acting wobbler that will self start. The bore is .250 and the stroke is .250. Dodi is happy running on 10 psi.
NOT FOR SALE |
|
McCabes Runner |
|
This is a valved engine made from plans. The bore is .250 and the stroke is .250. This engine will also run on 5 to 10 PSI.
NOT FOR SALE
|
|
Dodi |
|
Kerzel co2 x2 |
|
This is an .09 engine made from plans. This engine will run on 10 to 30 psi. At 30 psi it will swing a 9 x 4 prop at about 70 rpm. NOT FOR SALE |
|
Vertical Marine |
|
This engine was made from plans I found in a 1950 Popular Science. This engine will not run. Some dimensions were missing and others cannot be correct.
NOT FOR SALE |
|
These are some of the steam/air engines that I have made. The other projects are items that I made to help us to set up props and items that are not available elsewhere. |
|
Millie is a single action wobbler that was made from plans. The bore is .125 with a stroke of .125. Millie will run on about 5 PSI.
NOT FOR SALE |
|
Millie |
|
Project List |
|
Kerzel co2 |
|
I run this on air. The plans were found on the internet. The bore is .125 and the stroke is .125. It will run on 20 PSI.
NOT FOR SALE
|

|
I call this a prop blade equalizer. It insures the both blades are the same length. I have bushings for all the common crankshaft sizes.
Ask for drawing |
|
Prop Blade Equalizer
bB |
|
Fuel Bulb Filler Necks |
|
These are made to replace the plastic filler necks that you get with the rubber fuel bulbs.
Solder a common BB to the 1/8” brass neck to make your racing fast fill bulb.
$10.00 US + postage |
|
Cox Spinner Nuts |
|
These are made from 3/8 aluminum or brass hex stock—supplied with a 5-40 stud.
$2.00 US + postage |
|
Cox motor mount for profile models |
|
I machined these when we were trying to mouse race. They are a tight fit for a 1/4” profile fuselage. I would drill and tap 2-56 to mount the motor.
$2.00 US + postage |
|
Theses wheels are aluminum with O-Ring tires.
The small wheels are 7/8” for 1/2A Proto Speed and the larger are 1 1/2” for .21 Proto Speed.
Ask for drawing |
|
Aluminum wheels |



